Sea Nymph FM-146 SOLD

14'-6"Sea Nymph Fishing Machine 1988 in good shape. Pedestal seat,
Live well,storage under rear seat,anchor,paddle,Rictchie Angler lighted compass,older Eagle Magna III fish finder, rod holders all on a Sprint Galv. trailer with brand new tires.Trailer needs lights installed which I have. 900.00 tows it away

You have pm.

if its still available i would be interested...

What a Great boat!!
You better grab it quick!!

Thanks Rox. You're the best. And yes, It is sweet. It's a good boat and needs a good home.

wow!!!! DEAL!

What is it Rated for on the motor ?

25HP, I have a 97 Merc 20HP, Short Shaft with less than 30 hours on it that pushes the boat beyond your expectations. Had a 9.9 Force that came with the boat with 2 guys in it, it went put-put. The motor is going up later.

Theres a blast from the past. When I got back into fishing in 1990 that model was the first boat I was seriously interested in owning. Nice.

PM SENT

WOW !!!!!!!!!!!!....14'6" boat and trailer for $900 !!!!!!!!!

HELLUVA DEAL you posted up there Joe!!!!!!!!!

Bump!!

U kidding me ? This didn't sell yet? WOW !

Too bad it needs a short shaft

I've got a 20hp Merc short shaft that's not post yet. It does great numbers for this boat.

This boat still available on CTF is mind boggling !!!!!!!!

WHAT'S WRONG WITH YOU PEOPLE ?????!!!!!! ....CTFers are ALWAYS looking for 14'ers like this and expect to pay MUCH more than this GREAT DEAL!

DON'T MAKE ME BUY THIS!....I don't need it and have 6+ boats already....one is a 14'6".

People with 15" transom issues that want a 20" transom or have a 20" long shaft outboard for this boat can do what I did with my 14'6" 15" transom boat....I added an aftermarket aluminum jackplate to make it 20" and filled in my 15" transom with stainless steel plaating to gain freeboard and avoid transom splash.

Here is my 15" transom converted to a 20" transom:


Please HELP out a boataholic and someone please buy this rig!...before I have to!!!!!!!!!!
=========================================================
Joe,
-What do you expect to ask for the 20hp short shaft?...year?
-the trailer is registered/registerable?
-trailer axle, springs, bearings and tires good?
-hull no leaks?
-transom sound?

Buy it Don!!! lol

......you're not helping my disorder Matt!!!!!!!!!!

btw Matt: I will call you today/now about our addition continuing plans!...thanks

Don,

The motor is a 97 Merc with less than 30hrs on it. More like 20hrs.
The prop does not have one nick on it and still has the original paint on the prop without a scratch. Last used in the fall of 2006.
Asking price is $1200.Motor was $2300 when I bought it.

The trailer is registered. Just got the 2012 stickers. The trailer axle, springs and bearing were good when last used. It has bearing buddies. The tires are brand new. Put on in Spring 2007 and have approx 4 miles on them. From the shop to my home.

The hull had no leaks the last time I used it and the transom was sound cause the motor didn't fall off in Squantz

The carpeted plywood decking in the rear of the boat is a little soft in the area where you put the drain plug. The rest of the decking is in good shape.

Forgot to ad to the above post. Trailer takes 1-7/8" ball which I have to go with the trailer so long as you have a 2" reciever.

Sold as of 3:30 toaday to CTF'er pannier.

Thank you CTF.

That's a nice boat. My brother has the same boat except his takes a long shaft motor. Might be a year or two newer and it's red and gray.

FINALLY SOLD !!!!!!!

Congrats Joe and new CTF owner.

My wife thanks you both that I didn't "have" to buy another boat!