Factory Refurbished Humminbird 798 w/ Ram Mount $350

Posted by: onthewater102

Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/24/17 01:54 PM

Recently factory refurbished Humminbird 798 with internal GPS & preloaded Contour XD maps (2 card slots available for adding maps.) Includes new (unused) transom transducer (I had installed the through-hull transducer in my boat), power cord, hard screen protecting cover & 1" Ram Mount.
Posted by: duf

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/26/17 01:04 PM

Side imaging?
Posted by: poolpaul

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/26/17 01:42 PM

a 798 is an SI unit but it will not link with the other humminbird units
Posted by: onthewater102

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/26/17 02:05 PM

It requires you to use this switch http://www.humminbird.com/Products/AS-ETH-5PXG/ to link to other units per the 798 details on Humminbird's site http://www.humminbird.com/Products/798ci-hd-si-Combo/ but I've never tried linking two head units so I don't know what functionality it gives you.

It is an SI unit, but it can also handle 360 imaging if you have the accessories for it , as well as i-Pilot (Helix 5 SI units cannot use these accessories) and Humminbird's autochart map-making software.

My unit has the most up to date software version installed on it.
Posted by: poolpaul

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/26/17 06:05 PM

Correct it does Ethernet for some reason I thought I read 797 my mistake
Posted by: BBSkeeter

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/28/17 06:15 PM

Where are you locatef?
Posted by: onthewater102

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 01/29/17 09:28 AM

I live in Kent & work in Torrington.
Posted by: onthewater102

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 12:10 AM




Side Imaging/ Down Imaging unit with 2 SD slots compatible with Autochart, iPilot & many other accessories. I used a thru-hull transducer so the transom mount has never been opened/used. Upgraded to an 898. Screen replaced by humminbird prior to the 2016 season, has less than 50 hrs use since replacement. Includes the power cord, base, ram mount, unit, hard protective case & transducer. I will ship at my expense. Software version 6.300 (most recent update available) includes Navionics Countour XD preloaded charts.
Posted by: gloomgreenwater

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 06:56 AM

How much $$
Posted by: onthewater102

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 08:35 AM

$350
Posted by: BLUECHIP

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 08:42 AM

Originally Posted By: gloomgreenwater
How much $$


Can this be used for herring?
Posted by: cat_in_the_hat

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 09:02 AM

I love my slightly more current 798ciHDsi. with TWO!! card slots I use one for Lakemaster chart and the other for recording the complete fishing trip so I can sit back as the snow flies and see every fish and look for things I missed in the 798's spectacular side scanning recordings in the action on my PC using Reefmaster software. How many other units can do this stuff for $350?
Posted by: onthewater102

Re: Factory Refurbished Humminbird 798 w/ Ram Mount $350 - 03/21/17 09:24 AM

this has 2 card slots