The epoxy Poly-Fil worked great and the deck is firm and glued down!

I have been sanding the inside of the boat, and filling hundreds of holes, Screw holes, snap holes, drilled holes, and access holes.
Also had to fill in a groove that is worn into the floor by the center console over the years

I cut out the live well access and a access to pumps and plumbing in the rear, also cut out 2" self bailing scuppers (the original where only 3/4")

Sanded and skim coated the transom, lots of holes there too.











Old scupper holes




New Scupper holes